Flight; Takeoff/Landing Procedures - RUKO F11GIM2 User Manual

F 1 1 G IM 2 User Manual

14 Flight

14.1 Takeoff/Landing Procedures

Place the drone in an open, flat area, remove the gimbal cover.
bottom bottom
1
3
2
Power on the remote controller and the drone.
Wait until the remote controller and drone connected, connect the
app, complete the calibration process.
Keep the drone camera facing forward, start the motors.
Gently push the throttle joystick up to take off.
Pull the throttle joysticks down to land the drone.
Stop the motors after landing.
Power off the drone remote controller, replace the gimbal cover.
49
Copyright ©2023 Ruko All Rights Reserved.