RUKO F11GIM2 User Manual page 29

Camera Guideline:
Please remove the gimbal camera cover before flight.
①
When taking off from grass or sand, please place the aircraft
②
on the landing pad or cardboard to keep it level.
Do not turn on the aircraft when it is placed on a desk or hollow
③
wooden floor. These surfaces can amplify small vibrations into
high-frequency vibrations which may cause the gimbal to malfunction
and not work properly.
Do not interfere with the gimbal by putting external forces or
④
picking up the aircraft during calibration. Otherwise, the gimbal will
stop to work.
Touching the camera
On the grass
On the desk
F 1 1 G IM 2 User Manual
On the sand
On the hollow wooden floor
Picking up the Aircraft
(during self-inspection)
Copyright ©2023 Ruko All Rights Reserved.
27