Table of Contents
Advertisement
Data Management
Reviewing rescue data
To retrieve data from internal memory:
1. Open the AED lid.
2. Connect the serial cable to the PC and to the AED's serial port
under the blue rubber data access cover. The voice prompt will say
"Communications Mode."
3. Run the Rescuelink software program.
4. Select Communications, Get Rescue Data.
5. Select Internal Memory of AED then select OK.
6. Select a rescue by clicking on the date and press OK.
WARNING! Electric Shock and Fire Hazard.
Do not connect any telephones or unauthorized connectors to the
socket on this equipment.
Caution: Serial Communication Cable.
The serial communication cable is only for use with the AED; it is not
to be used with a telephone.
70-02062-02 A
4-2
Powerheart® AED G3 PLUS 9390A AND 9390E
Advertisement
Table of Contents
