Setting The Aed Internal Clock - Cardiac Science POWERHEART AED 9390E Operator's And Service Manual

Setting the AED internal clock

During a rescue, the text display shows the number of shocks delivered
and the elapsed time from the beginning of the rescue (when the lid
was first opened). During CPR, a countdown timer will be displayed.
The text version of the voice prompts will also be displayed.
Note: There is a 3 second delay between the time the AED lid is
opened and the start of the rescue. This 3 second delay is not
included in the elapsed rescue time.
Setting the AED internal clock
For US models, the internal clock is preset to Central Standard Time.
You can reset it to your local date and time. To set the clock, you need a
Windows XP or newer PC, Rescuelink software installed, and the AED
serial cable connected to the PC.
To set the clock:
1. Ensure that the PC is set at the correct local time and date.
2.
3. Connect the cable to the serial port on the AED.
4. Verify that the voice prompt states "Communications Mode".
5. Click Communications on the main menu. Select AED Date and
Time.
6. Click on the Get button to review the current time in the AED.
7. If the time and date is incorrect, click Set to set new time and date.
The AED date and time will automatically be updated to the PC's
time and date.
Powerheart® AED G3 PLUS 9390A AND 9390E
Open the lid of the AED and run the Rescuelink software on the
PC.
70-02062-02 A
3-5