Table of Contents
Advertisement
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Orientation
The Intimidator Spot 160 may be mounted in any position; however, make sure adequate ventilation is
provided around the product.
Rigging
•
Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming.
•
Make sure adequate ventilation is provided around the product.
•
Make sure that the structure or surface onto which you are mounting the product can support the
product's weight. (see the
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power-linking cables to
reach.
•
The rubber feet also serve as floor supports and allow for surface mounting. When mounting the
product on the floor, make sure that the product and cables are away from people and vehicles.
Mounting Diagram
Mounting clamp
(such as CLP-15 from Chauvet)
Mounting bracket
When using one mounting clamp with this fixture, use a clamp with a captive bolt to
prevent accidental loosening.
Intimidator Spot 160 User Manual Rev. 2
Technical
Specifications)
Safety
Notes.
Safety cable
(such as CH-05
from Chauvet)
Feet for floor
mounting
Page 5 of 20
Advertisement
Table of Contents
