Operation
IRC-6 Infrared Remote Control
The Intimidator Spot 160 ILS is compatible with the IRC-6 infrared remote control from Chauvet. To set the
Intimidator Spot 160 ILS to IR mode, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Press <UP> or <DOWN> to select IR.
5. Press <ENTER>.
IRC-6 Operation
Dimmer
To set the dimmer value with the IRC-6:
BLACK
AUTO
SOUND
OUT
Pan/Tilt
SENSI-
STROBE
SPEED
TIVITY
To set the pan/tilt speed using the IRC-6:
%
MANUAL
FADE
R
G
B
A
UV
W
To manually set the pan/tilt values:
-
+
0
1
2
3
Sound Mode
To activate sound-active mode using the IRC-6:
4
5
6
7
8
9
To adjust the sound sensitivity:
Auto Mode
To activate auto mode using the IRC-6:
To activate auto color/gobo mode using the IRC-6:
Color Wheel
To access the color wheel using the IRC-6:
To adjust the speed of the color wheel rotation:
Gobo Wheel
To access the gobo wheel using the IRC-6:
To adjust the speed of the gobo wheel rotation:
Blackout
To black out the lights with the IRC-6:
This will turn off all the lights until the button is pressed again.
Note: The IRC-6 will not respond to any inputs when Blackout is activated. If
the product does not respond when a button is pressed, try pressing
<BLACKOUT>, as Blackout may have been activated.
Intimidator Spot 160 ILS User Manual Rev. 2
1. Press <DIMMER>.
2. Use <+> or <–> to widen or narrow the shutter.
1. Press <SPEED>.
2. Use <+> or <–> to increase or decrease the pan/tilt speed from 000 (fastest)
to 255 (slowest).
1. Press <A> to toggle between pan and tilt.
2. Use <+> or <–> to increase or decrease the pan/tilt value, from 000–255.
1. Press <SOUND>.
1. Press <SENSITIVITY>.
2. Use <+> or <–> to increase or decrease the sound sensitivity.
1. Press <AUTO>.
2. Press <+>, <–>, or <0>–<9> to select an auto program.
1. Press <B>.
1. Press <FADE> to cycle through the static colors in the color wheel.
1. Press <R> to set the color wheel rotation speed.
2. Use <+> or <–> to increase or decrease the speed from 000 (slowest) to
255 (fastest).
3. Press <R> to toggle direction.
1. Press <MANUAL> to cycle through the static gobos in the gob wheel.
1. Press <G> to set the gobo wheel rotation speed.
2. Use <+> or <–> to increase or decrease the speed from 000 (slowest) to
255 (fastest).
3. Press <G> to toggle direction.
1. Press <BLACKOUT> on the IRC-6.
13