Table of Contents
Advertisement
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list or increases a selected numeric value
<DOWN>
Navigates downwards through the menu list or decreases a selected numeric value
<ENTER>
Enables the currently displayed menu or sets a selected value into the selected function
Menu Map
Main Level
Address
DMX
Slave
Run Mode
Manual
Pan Reverse
Tilt Reverse
Screen
Reverse
Pan Angle
Tilt Angle
Setup
Totem Mode
Sensitivity
Indicator
Flash if DMX
Page 6 of 20
Programming Levels
001–512
11CH
05CH
Slave1–4
Auto
Sound
IR
Pan
Tilt
Color
000–255
Gobo
Dimmer
Shutter
OFF
ON
OFF
ON
OFF
ON
540
360
180
270
180
090
OFF
UP
DOWN
001–100
OFF
ON
OFF
ON
Reset
Factory Set
Description
Sets the DMX starting address
Selects the DMX mode
Selects Slave mode 1, 2, 3, or 4
Selects Auto mode
Selects Sound-Active mode
Selects Infrared control mode
Manual pan control
Manual tilt control
Manual color wheel control
Manual gobo wheel control
Manual dimmer control
Manual shutter control
Normal pan operation
Reverse pan operation
Normal tilt operation
Reverse tilt operation
Normal display
Reverse display
Selects the 540° pan angle range
Selects the 360° pan angle range
Selects the 180° pan angle range
Selects the 270° tilt angle range
Selects the 180° tilt angle range
Selects the 90° tilt angle range
Does not restrict the pan and tilt motion
Restricts the pan and tilt motion for
overhead mounting
Restricts the pan and tilt motion for surface/
floor mounting
Sets the sound sensitivity
Enables/disables LED indicator
Enables/disables Flash if DMX
Resets the product
Loads factory defaults
Intimidator Spot 160 User Manual Rev. 2
Operation
Advertisement
Table of Contents
