Service Work (As Additional Order) - Husqvarna FC 250 EU 2015 Owner's Manual

Table of Contents

Advertisement

9
SERVICE SCHEDULE
9.2

Service work (as additional order)

Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Perform a fork service.
Service the shock absorber.
Change the spark plug and spark plug connector.
Change the piston.
Check/measure the cylinder.
Check the cylinder head.
Change the valves, valve springs and valve spring seats.
Check the camshaft and cam lever.
Change the connecting rod, conrod bearing, and crank pin.
Check the transmission and shift mechanism.
Check the oil pressure regulator valve.
Change the suction pump.
Check the force pump and lubrication system.
Change the timing chain.
Check the timing assembly.
Change all engine bearings.
One-time interval
Periodic interval
Every 100 operating hours - corresponds to about 700 liters of fuel (185 US gal)
Every 50 operating hours - corresponds to about 350 liters of fuel (92.5 US gal)
Every 40 operating hours - corresponds to about 280 liters of fuel (74 US gal)
(
p. 55)
(
p. 39)
Once after 20 operating hours
Once after 10 operating hours
Annually
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fc 250 us 2015

Table of Contents