Service Work (As Additional Order) - Husqvarna 2014 FC 250 EU Owner's Manual

9 SERVICE SCHEDULE
○
One-time interval
●
Periodic interval
9.2

Service work (as additional order)

Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Change the spark plug and spark plug connector.
Change the piston.
x
Check/measure the cylinder.
Check the cylinder head.
x
Change the valves, valve springs and valve spring seats.
Check the camshaft and cam lever.
Change the connecting rod, conrod bearing, and crank pin.
Check the transmission and shift mechanism.
Check the oil pressure regulator valve.
Change the suction pump.
Check the force pump and lubrication system.
Change the timing chain.
x
Check the timing assembly.
Change all engine bearings.
●
Periodic interval
Every 100 operating hours - corresponds to about 700 liters of fuel (185 US gal)
Every 50 operating hours - corresponds to about 350 liters of fuel (92.5 US gal)
x
x
( p. 53)
x
( p. 38)
x
x
x
x
x
x
x
x
x
x
x
x
25
Annually
●
●
●
●
●
● ●
● ●
● ●
●
● ●
●
●
● ●
●
●
●
● ●
●