Service Work (As Additional Order) - Husqvarna 2014 FC 450 EU Owner's Manual

9 SERVICE SCHEDULE
9.2

Service work (as additional order)

Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Service the shock absorber.
Change the spark plug and spark plug connector.
Change the piston.
x
Check/measure the cylinder.
Check the cylinder head.
x
Change the valves, valve springs and valve spring seats.
Check the camshaft and rocker arm.
Change the connecting rod, conrod bearing, and crank pin.
Change the shaft seal rings of the water pump.
Check the transmission and shift mechanism.
Check the oil pressure regulator valve.
Change the suction pump.
Check the pressure pump and lubrication system.
Replace the timing chain.
x
Check the timing assembly.
Change all engine bearings.
○
One-time interval
●
Periodic interval
Every 100 operating hours - corresponds to about 700 liters of fuel (185 US gal)
Every 50 operating hours - corresponds to about 350 liters of fuel (92.5 US gal)
Every 40 operating hours - corresponds to about 280 liters of fuel (74 US gal)
x
x
( p. 53)
x
( p. 38)
x
x
x
x
x
x
x
x
x
x
x
x
Once after 20 operating hours
x
x
25
Annually
●
●
●
●
○ ●
●
● ●
● ●
● ●
●
● ●
●
● ●
●
●
●
●
●
● ●
●