AUMA SAEx 25.1 Operation Instructions Manual page 17

Figure 16: Tighten flange
[2]
[4]
[5]
11. Tighten screws [5] between valve and output drive type A crosswise applying a
torque according to table
5.3.2.2 Finish machining of stem nut for output drive type A
This working step is only required if stem nut is supplied unbored or with pilot bore.
For exact product version, please refer to the order-related technical data sheet or
the AUMA Assistant App.
Tightening torques for screws
Assembly
[} 49].
17