Data Report - netvox R718N3 E Series User Manual

5. Data Report

The device will immediately send a version packet report along with two uplink packets including 3-phase current value and
battery voltage.
The device sends data in the default configuration before any configuration is done.
Default setting:
Max Interval = 0x384 (900s)
Min Interval = 0x384 (900s)
CurrentChange = 0x0064 (100 mA)
Three-phase current detection:
The device would detect and send report of the current value as the function key is triggered or in configuration.
Measurement Range and Accuracy:
R718N3(E)
R718N37(E)
R718N315(E)
R718N325(E)
R718N363(E)
R718N3300
Note: Current transformer (measurement range
Current transformer (measurement range
Please refer to Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver
http://www.netvox.com.cn:8888/cmddoc
Data report configuration and sending period are as following:
Min. Interval
(Unit:second)
Any number between
1 to 65535
CT Measurement Range
Solid-core
Clamp-on
Clamp-on
Clamp-on
Clamp-on
Clamp-on
to resolve uplink data.
Max. Interval
(Unit:second)
Any number between
1 to 65535
100mA to 50A ±1% (measurement range: 300mA to 50A)
100mA to 75A ±1% (measurement range: 300mA to 50A)
1A to 150A
1A to 250A
10A to 630A
150A to 3000A
≤ 75A): report data as 0 when the current < 100mA .
> 75A): report data as 0 when the current < 1A.
Reportable Change
Can not be 0
5
Accuracy
±1%
±1%
±1%
±1%
Current Change≥
Reportable Change
Report
per Min. Interval
Current Change＜
Reportable Change
Report
per Max. Interval