Wireless differential pressure and temperature sensor (10 pages)
Summary of Contents for netvox R716S
Page 1
This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX Technology. The specifications are subject to change without prior notice.
Table of Content 1. Introduction ................................3 2. Appearance ................................3 3. Main Features ................................4 4. Set up Instruction ..............................5 5. Application ................................7 6. Important Maintenance Instruction ......................... 7...
1. Introduction R716S is developed based on LoRa technology to detect the network signal of the LoRa network. R716S can detect the LoRa signal strength of the scanned area and display the detected data through LCD. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance.
Low power consumption and long battery life Battery Life: ⁻ Please refer to web: http://www.netvox.com.tw/electric/electric_calc.html ⁻ At this website, users can find battery life time for variety models at different configurations. 1. Actual range may vary depending on environment.
Installation completed battery cover R716S is a power-saving device. After powering on, it will light up and display Then it starts to search the network automatically. If it does not join to the network successfully, “noNE” will be displayed. If it joins to the network successfully, the current signal value will be displayed and the signal value will be updated in real time.
Page 6
Press the level key, the LCD will display the current signal level and update the level value in real time. 4.4. LCD Interface R716S display four digits. 1. Press the signal key, and it will display the signal strength in four digits.
4.6. Command After the device is powered on and automatically detects the signal value, the device will send a command every 5 seconds. After the signal is detected, each sent command corresponds to a replied command. If the device is in the detection state, the command will be sent. If the device is activated or in the sleep mode, the command will not be sent.