76Mm Width Support - Star Micronics TSP200 User Manual

5-3. 76mm Width Support

76mm width support is an available accessory when adding to or changing the
configuration of the printer.
80mm holders
M2 screw
Upper case
76mm holders
76mm holders
Holder lever
M2 screw
– 14 –
Support spacers
1 Open the printer cover.
2 Use a screwdriver to remove the
M2 screws that fasten the 80mm
holders to the upper case and the
holder lever. Replace the 80mm
holders with the optional 76mm
holders.
Caution
Be careful not to drop any of the
screws.