Changing The Paper Width - Star Micronics TSP650II SERIES Hardware Manual

3-6-2. Changing the Paper Width

When using 57.5 mm width paper rolls, attach the supplied paper roll guide to the printer. When you change the effective
print width (paper roll width), change the printer utility's memory switch setting.
For details, see the printer utility help.
(1) Insert the paper roll guide firmly into the slot in the printer labeled "r58" as shown in the figure below.
Paper roll guide
(2) Secure the paper roll guide in place by pushing the section marked as "A" in the figure.
Note1 : Do not insert the paper roll guide into the slot labeled "r 65".
It may cause problems.
2: Do not change the paper width while the printer is in use.
The amount of wear on the thermal head, rubber roller, and cutter varies depending on the paper width.
This varying amount of wear may cause problems in printing and cutting.
A
- 11 -