Errors - Star Micronics TSP200 User Manual

6-3. Errors

1) Automatic Recovery (Power Lamp: Flashing; On-Line Lamp: On)
Error Description
Abnormal head
temperature
2) Recoverable Errors (Power Lamp: Flashing; On-Line Lamp: Off)
Error Description
No paper
Head up
Paper near end of
roll
Cover is open
Error during paper
cutting
3) Fatal Error (Power Lamp: Flashing; On-Line Lamp: Flashing) the unit
will have to be repaired.
Power Lamp Flashing Pattern
Approx. 1 Sec Approx. 1 Sec
Power Lamp Flashing Pattern
Approx. 1 Sec Approx. 1 Sec
Approx. 250 ms Approx. 250 ms
Approx. 2 Sec Approx. 2 Sec
Approx. Approx.
500 ms 500 ms
Approx. 125 ms Approx. 125 ms
– 20 –
Recovery Conditions
Automatic recovery after head
temperature lowers.
Recovery Conditions
Insert paper and press on-line
switch. (Star)
Insert paper and close cover. (ESC/
POS)
Lower head and press on-line
switch. (Star)
Lower head and close cover. (ESC/
POS)
Press on-line switch and printing
will continue. Both lamps light
when printing and power lamp
flashes and on-line lamp lights
when on-line. (Star)
Same as "No paper". (ESC/POS)
Close cover and press on-line
switch. (Star)
Close cover. (ESC/POS)
If the blade is at the home position,
press on-line switch to continue
printing. If the blade is not at the
home position, it is not a recover-
able error. (Star)
Command (ESC/POS)