Control Panel; Power On - Star Micronics TSP200 User Manual

6-1. Power ON

Operating Panel
Paper - Yes
POWER
ON LINE
1 2 3
Paper - No
POWER
ON LINE
When the power switch is turned on, the Power Lamp and On-Line Lamp will
come on. If there is no paper, the Power Lamp will flash at approximately one
second intervals.
ON LINE Switch Indicator (Star mode only)
Used to switch between the off-line and on-line modes.
The ON LINE indicator turns on when the printer is on-line.
When the printer is off-line, printing will stop and data from the host computer
cannot be received.
FEED Switch
Each press of the FEED switch feeds paper through the printer one line at a time.
Paper is fed continuously when the FEED switch is pressed and held.
The functions of the FEED switch are supported by both the on-line and off-line
modes.
Power Indicator
The power indicator turns on when power is being supplied to the printer.

6. Control Panel

FEED
4
FEED
– 17 –
1 Power Lamp (Green LED)
2 On-Line Lamp (Green LED)
3 On-Line Switch
4 Feed Switch