Trademark Acknowledgments - Star Micronics TSP200 User Manual

Star micronics tsp200: user guide
Hide thumbs Also See for TSP200:
Table of Contents

Advertisement

Available languages

Available languages

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to corect
the interference at his own expense.
For compliance with the Federal Noise Interference Standard, this equipment requires a shielded
cable.
This statement will be applied only for the printers marketed in U.S.A.
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectiques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.
The above statement applies only to printers marketed in Canada.
EC Council Directive 89/336/EEC of 3 May 1989
This product, has been designed and manufactured in accordance with the International Standards EN 50081-1/01.92 and
EN 50082-1/01.92, following the provisions of the Electro Magnetic Compatibility Directive of the European Commu-
nities as of May 1989.
EC Council Directive 73/23/EEC and 93/68/EEC of 22 July 1993
This product, has been designed and manufactured in accordance with the International Standards EN 60950, following
the provisions of the Low Voltage Directive of the European Communities as of July 1993.
The above statement applies only to printers marketed in EU.

Trademark acknowledgments

TSP200-24: Star Micronics Co. Ltd.
ESC/POS: Seiko Epson Corporation
Notice
All rights reserved. Reproduction of any part of this manual in any form whatsoever, without STAR's express
permission, is strictly forbidden.
The contents of this manual are subject to change without notice.
All efforts have been made to ensure the accuracy of the contents of this manual at the time of printing. However,
should any errors be found, STAR would greatly appreciate being informed of them.
The above notwithstanding, STAR can assume no responsibility for any errors in this manual.
Federal Communications Commission
Radio Frequency Interference
Statement of
The Canadian Department of Communications
Radio Interference Regulations
Manufacturer's Declaration of Conformity
Statement
CE
© Copyright 1999 Star Micronics Co., Ltd.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tsp200-24

Table of Contents