Table of Contents
Advertisement
11-5. Environmental Requirements
Temperature and humidity
(1) During operation
Temperature: 5°C to 45°C
Humidity:
10% RH to 90% RH (no condensation)
(%RH)
90
80
60
Relative humidity
40
20
10
(2) During storage (excluding paper)
Temperature: -20°C to 60°C
Humidity:
10% RH to 90% RH (no condensation)
Note: The maximum temperature and humidity combination is 40°C and 90% RH (without condensation).
11-6. Reliability Specifications
(1) Service life
Mechanical: 20,000,000 lines
Head:
<Conditions>
Average printing ratio: 12.5%; recommended thermal paper: 65 µm (when using P220AG)
(2) MCBF: 60,000,000 lines
The Mean Cycle Between Failure (MCBF) is defined to be the overall failure cycle, which includes random or wear fail-
ures that occur until the printer reaches its mechanical life of 20,000,000 lines.
Note: The mechanical life is 20,000,000 lines. The MCBF of 60,000,000 lines does not indicate the durable service life.
(3) Auto cutter service life
Paper width of 79.5 mm and 57.5 mm including tack label backing paper
Paper width between 65 µm and 100 µm: 2,000,000 partial cuts, 2,000,000 full cuts
Paper width greater than 100 µm and up to 150 µm: 600,000 partial cuts, 600,000 full cuts
Paper width of 79.5 mm for full-face thermal label paper
00,000 partial cuts and 00,000 full cuts
Note: A ll the reliability values indicated above are based on the use of the recommended thermal paper. They are not guar-
anteed with the use of non-recommended thermal paper.
Operating environment
0
10
20
Temperature (°C)
Operating temperature and humidity range
150 km, 150,000,000 dots (maximum for monochrome printing)
34°
90% RH
C
40°
C
30
40
- -
65% RH
45°
50% RH
C
50
- Quick Links:
- Errors
Hide quick links:
Advertisement
Table of Contents
