Star Micronics FVP-10U Hardware Manual page 24

Caution Symbols
WARNING
4 If you notice smoke or strange odors coming from the printer, turn the power switch off immediately, and remove the pow-
er plug from the AC outlet. For repairs, contact the dealer that you bought the printer from.
4 Never attempt to repair this product yourself. Improper repair work can be dangerous.
4 Never disassemble or modify this product. Tampering with this product may result in injury, fire, or electric shock.
4 Do not touch the cutter blade.
- There is a cutter inside the paper outlet slot. Never put your hand in the slot regardless of whether or not the printer is in
operation.
- You must open the front cover to replace paper. However, because the cutter blade is on the inside of the front cover, be
careful not to bring your face and hands too close to the blade.
4 During and immediately after printing, the area around the print head is very hot. Never touch it because you could be
burned.
4 When replacing paper, cleaning the head, or performing other maintenance tasks, be careful not to injure yourself when
you put your hands inside the printer.
4 Be sure to turn off the printer first when maintenancing the cutter. Failure to do so is dangerous.
4 Be careful not to get your fingers caught when opening and closing the printer's front cover.
When fixing the printer in place, hold the sides of the case.
CAUTION
4 We recommend that you unplug the printer from the power outlet whenever you do not plan to use it for long periods.
Because of this, you should locate the printer so that the power outlet it is plugged into is nearby and easy to access.
4 If the voltage shown on the label on your printer does not match the voltage for your area, contact your dealer immediately.
4 Make sure that the printer and the computer are turned off and unplugged from the AC outlet before you make connections.
4 Do not connect a telephone line to the peripheral drive connector. Doing so may cause the printer to malfunction. Also, for
safety purposes, do not connect a wire that may carry excessive voltage to the peripheral drive connector.
4 Do not push the cover open lever and open the front cover while the printer or the cutter is in operation.
4 Do not pull out paper when the front cover is closed.
These labels are located near the thermal print head.
Because the thermal print head is hot immediately after printing, do not touch it. Static electricity can
damage the thermal print head. To protect the thermal print head from static electricity, do not touch
it.
This label is located near the peripheral drive connector.
Do not connect this to a telephone line.
This symbol label or stamp is placed near the screws securing the case, which should not be opened
by individuals other than service personnel.
Individuals, other than service personnel, should not remove these screws.
High voltage areas in the case can be dangerous.
-  -