Connecting The Ac Adapter - Star Micronics FVP-10U Hardware Manual

3-4. Connecting the AC Adapter
Note:
B efore connecting or disconnecting the AC adapter, make sure that the printer and all the devices connected to it are
turned off.
Then remove the power cord plug from the outlet.
(1) Connect the AC adapter to the power cable.
Note: The optional AC adapter has been designed specifically for this printer.
Other AC adapters may not meet the EMC technical standards.
Option: PS0A-B
(2) Connect the AC adapter to the connector on the printer.
(3) Insert the power cable plug into an AC outlet.
CAUTION
When disconnecting the cable, take hold of the cable connector to
pull it out. Releasing the lock makes it easy to disconnect the con-
nector.
Pulling the cable excessively could cause damage to the connector.
-  -