Ethernet Interface Specifications - Star Micronics FVP-10U Hardware Manual

(1) Communication specifications
General specifications:
Communication media: 10Base-T and 100Base-TX
Data rate:
Protocol:
TCP/IP protocols:
(2) Connector:
Note: Factory-set login password for administrator
HTTP (Web), Telnet, or FTP protocol is used when you change the printer settings. To change the settings, you
must log into the printer using an administrator account.
The administrator account login information for HTTP (Web), Telnet, and FTP are shown below.
Administrator account name
Password
* You can change the password after logging in.

16. Ethernet Interface Specifications

Conforms to IEEE802.3
10 Mbps and 100 Mbps
TCP/IP
ARP, RARP, BOOTP, DHCP, LPR, #9100, HTTP, TELNET, FTP, TFTP
RJ-45 (8-pin modular)
"root" (required)
"public" (required)
-  -