Cleaning - Bartscher 195 Plus Manual

Cleaning and Maintenance
6.2

Cleaning

CAUTION!
During maintenance works and cleaning (when the protective elements
are removed) check for any possible hazards.
Unplug the appliance from a socket.
Ensure that the slice thickness adjustment knob is in '0' position.
Move the carriage towards the slice thickness adjustment knob.
ATTENTION!
Never wash removable elements in a dish-washer.
1. At the end of each working day, and more frequently if needed, thoroughly clean
all parts of the appliance that come into contact with food products.
2. Carry out the cleaning of the individual groups observing the instructions below.
Carriage and Pusher Handle
1. To clean, remove the carriage (6) from the appliance.
NOTE!
The carriage can only be removed when the slice thickness adjustment
knob is undone beyond the zero setting and the carriage is pulled towards
the slice thickness adjustment knob.
2. In doing so, the carriage lock knob must be loosened. If it cannot be completely
loosened, pull the carriage again in the direction of the carriage lock knob until
the safety device audibly engages.
174196
Fig. 11
23 / 28
EN