Table of Contents
Advertisement
Installation and operation
Appliance Operation (Fig. 6, 7)
1. Plug the appliance into a suitable single socket.
2. To switch the appliance on, press the white START button (B) in the appliance
ON/OFF switch (9).
The indicator lamp (C) lights up and remains lit during operation.
3. Leave the appliance on for 2–3 minutes in order to make sure it operates
correctly (without slicing products).
4. Switch the appliance off with the black STOP button (A) in the appliance
ON/OFF switch (9).
5. Set the slice thickness adjustment knob (8) in '0' position.
6. Lift the pusher handle (4) and place the cut goods on the carriage tray (5) so
that they are between the movable slice thickness partition (13) and the pusher
handle with the pusher (4).
WARNING!
In order to avoid accidents, always use the pusher handle (4) to push the
product to be sliced to the movable slice thickness partition (13)!
7. Adjust slice thickness: rotate the slice thickness adjustment knob (8) counter-
clockwise until it reaches the desired position.
8. Assume correct stance at the slicing machine (Fig. 8). Put right hand on the
pusher handle, left next to the slice tray so as not to touch the blade; the body
must be straight and vertical towards the worktop.
Correct stance
WARNING!
Risk of injury through contact with the blade!
Never assume a stance with hands, fingers or other parts of the body that might
come into contact with the blade!
9. Switch the appliance on with the white START button (B) in the appliance
ON/OFF switch (9).
174196
Incorrect stance
EN
Fig. 8
19 / 28
Advertisement
Table of Contents
