Table of Contents
Advertisement
3. Fully loosen the carriage lock knob and remove the carriage from the appliance
by pulling it upwards.
ATTENTION!
The 195 Plus model / art. No. 174196 does not have a carriage lock knob.
The carriage of the appliance is not removable.
4. Clean the carriage (6) with guard (14), carriage tray (5) and pusher handle with
pusher (4) in warm water with a soft cloth and neutral cleaning agent.
5. Rinse with fresh water to remove remains of the cleaning agent.
6. Allow cleaned components to air dry or dry thoroughly before reassembling
them in the appliance.
Blade and Blade Cover
WARNING! Cut wounds hazard!
The blade is very sharp!
Never touch the blade edge with bare hands.
During cleaning of the blade wear class 5 cut resistant protective gloves of DIN
EN 388 standard!
EN
1. Remove the sharpener from the appliance (Fig. 9).
2. In order to remove the blade guard (3) for cleaning
loosen the fixing screw (d) at the back of the
appliance (Fig. 12) and push it towards the blade
guard (3).
3. Remove the blade guard (3) from the appliance.
4. To remove the blade (1) undo 3 locking screws
(e) using a suitable screwdriver (Fig. 13).
5. Carefully detach the blade (1).
6. Clean the blade guard (3) and blade (1) in
warm water and a neutral cleaning agent. Use a
sponge, suitable cleaning brush or soft cloth.
Rinse in fresh water.
24 / 28
Cleaning and Maintenance
Fig. 12
Fig. 13
174196
Advertisement
Table of Contents
