Table of Contents
Advertisement
Cleaning and Maintenance
7. Clean the blade protection ring (2) in warm water and a neutral cleaning agent.
Rinse in fresh water. Leave the cleaned parts for drying or wipe them with a dry
cloth.
8. After cleaning install the blade (1) with the use of three adjustment screws (e) —
maintaining correct stance — and the blade guard (3) with the use of the screw
(d).
Blade Protection Device and Slice Guide (Fig. 14)
1. Loosen the lower screw (f) of the protection device (20) at the rear side of the
appliance. Remove the slice guide (16).
2. Loosen the upper screw (f) and remove the protection device (20) for cleaning.
3. Clean removed parts in warm water with a neutral cleaning agent.
4. Rinse in fresh water.
5. Thoroughly dry all cleaned elements.
174196
Fig. 14
25 / 28
EN
Advertisement
Table of Contents
