Advertisement

Quick Links

3L
191001
Original-Gebrauchsanleitung
V1/0218

Advertisement

Table of Contents
loading

Summary of Contents for Bartscher Samovar 3L

  • Page 1 191001 Original-Gebrauchsanleitung V1/0218...
  • Page 2: Table Of Contents

    6.2 Start-up ......................38 6.3 Operation ......................39 6.4 Preparation of tea ....................42 7. Cleaning and descaling..................44 8. Possible Malfunctions ................... 47 9. Waste disposal ...................... 48 Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120 33154 Salzkotten...
  • Page 3: Safety

    Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
  • Page 4: Safety Instructions

    HOT SURFACE! This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! HOT STEAM! This symbol indicates that during the operation the hot steam escapes from the device. Risk of scalding if safety instructions are not observed! CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device.
  • Page 5  Do not control the device with use of external timer or remote controller.  The device must be operated in correct and safe technical condition only. In case of operational problems disconnect the device from the power supply (pull the plug from the socket) and contact the service company.
  • Page 6  The power cable must not be folded, bent or tangled, and must always remain fully unrolled. Never place the device or other objects on the power cable.  Do not cover the cable. Keep away the cable from operating range and do not immerse it into water.
  • Page 7 HOT SURFACE! Burn hazard! To avoid the hazard results please follow the safety instructions below.  The water tank surface gets very hot when the device is in use! In order to avoid burns of fingers and hands do not touch hot surfaces of the device! During operation touch only handles and switches designed for such purpose.
  • Page 8 WARNING! Health hazard due to microbes! To avoid the hazard results please follow the safety instructions below.  The water tank must be periodically emptied, cleaned, and disinfected to eliminate the possibility of growth of harmful and dangerous microbes. WARNING! In order to avoid any damages of the device follow the instructions below: ...
  • Page 9: Proper Use

    1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual. All technical activities like installation and maintenance must be performed by the qualified service personnel only. The device is designed for use at home and in similar places: ...
  • Page 10: General Information

    2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
  • Page 11: Transport, Packaging And Storage

    3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
  • Page 12: Technical Data

    4. Technical data 4.1 Overview of parts Base with integrated powerline Tea strainer and cable storage Lid of teapot Control light Handle of teapot Power cable with plug Teapot Drain tap Steam outlet Drain tap lever Handle of water tank (2x) Max.
  • Page 13: Technical Specification

    4.2 Technical specification Name Samovar 3L 191001 Code-no.: Material: Stainless steel  Handle heat insulated  Warming function  Automatic shutdown  Overheating protection Realization:  Control unit: electronic, toggle switch  Control lamp: heating  Glasses / cup height max.: 140 mm Temperature range: 20 °C to 100 °C...
  • Page 14: Installation

    5. Installation 5.1 Positioning  Before the operation unpack the device and remove all package material and protective foil from the device and equipment. CAUTION! Never remove the rating plate and any warning signs from the device.  Place the device on top of an even, stable, dry, and water-resistant surface which supports the weight of the device and is not heat sensitive.
  • Page 15: Start-Up And Operation

    6. Start-up and operation 6.1 Before operation  Before operation become familiar with the device and equipment by reading this manual.  Before the device operation clean it thoroughly according to the instructions in section 7 “Cleaning and descaling”.  Fill the water reservoir to its maximum capacity (as indicated) and boil.
  • Page 16: Operation

    Activation / deactivation of the device  The device is turned on/off by rotating the temperature controller. In position the device is turned off.  To set the device in the normal operation mode position the temperature controller . In position water will be boiled as quickly as possible.
  • Page 17  Rotate the temperature controller clockwise. The thermostat allows for stepless adjustment of water temperature. The following settings may be used: Boiling / interval boiling (BOIL) / HOT / WARM. Follow the table on page 38.  The control light is on during the heating phase. Water boiling ...
  • Page 18 Adding water CAUTION! Burn hazard! During filling of hot tank the released hot steam may cause burns of hands, arms, and face! Do not remove the lid during boiling  Rotate the temperature controller counterclockwise to position  Before refilling with water leave the device for a few minutes for coling down. NOTE! The thermostat will turn the device off when there is no (or too little) water in the tank.
  • Page 19: Preparation Of Tea

    6.4 Preparation of tea There are teas and teas. In the strict sense, the term tea describes a beverage made by steeping the leaves of Camellia sinensis in boiling water. There is black and green tea. Hot water can however also be poured over leaves of other plants or pieces of fruit. Therefore preparation of tea is not always the same.
  • Page 20 NOTE! You might choose the tea concentration by taste. Always take notice of the steeping time indicated on the tea packing, as it differs between the tea sorts.  After the desired brewing time has elapsed, remove the tea strainer (tea bag) from the teapot.
  • Page 21: Cleaning And Descaling

    Herbal infusion CAUTION! Always prepare infusions of herbs, fruit, Rooibos and spice with boiling water and let them steep for minimum 5 to 10 minutes. This is to ensure that the beverage is completely safe for consumption!  For herbal infusions, whether prepared with loose leaves or bags, always use boiling water and adhere to the recommended steeping time.
  • Page 22 Cleaning o Clean the device regularly. o Empty the device after each use. o Thoroughly rinse the water tank with clean water. CAUTION! The water tank should be periodically completely emptied, and cleaned (disinfected) in order to eliminate the possibility of harmful microbial growth. o Clean the samovar's surface with a soft, wet cloth and dry thoroughly.
  • Page 23 Descaling CAUTION! Complaints will not be accepted if the samovar is not descaled regularly as described in the instruction manual. Such complaints are no cases of warranty! o Bad water conditions might lead to scaling. This results in longer heating time and might damage the device.
  • Page 24: Possible Malfunctions

    8. Possible Malfunctions In case of malfunction set the temperature controller in position and disconnect the device from the power supply (pull the plug!). Before contacting the service or sales agent, verify - based on the table below - whether it is possible to eliminate disruption in operation.
  • Page 25: Waste Disposal

    Electric devices should be used and disposed of properly to prevent the impact on the environment.  Disconnect the device from the power supply and remove the power cord from the device with the use of diagonal pliers. Bartscher GmbH phone: +49 5258 971-0 Franz-Kleine-Str. 28 fax: +49 5258 971-120...

This manual is also suitable for:

191001

Table of Contents