infobit iMatrix H44VAW User Manual page 25

If the Mode is "Static", you can set manually the IP Address/Gateway/Subnet/Telnet
Port as required.
If the Mode is "DHCP", it will search and be filled with the IP Address assigned by
the router automatically. You can't modify it now.
② Modify User Password:
Click the "User" button, enter the correct Old Password, New Password, and Confirm
Password, and then click "Save". After successful modification, there will be a prompt,
as shown in the following figure:
Note: Input rules for changing passwords:
(1) The password can't be empty.
(2) New Password can't be the same as Old Password.
(3) New Password and Confirm Password must be the same.
③ Set the Default Network:
Click "Set Network Defaults", there will be a prompt, as shown in the following figure:
Click "OK" to search the IP Address again. After searching is completed, it will switch
to the login page, the default network setting is completed.
23 / 38