Variable
Description
x
Specifies the number (0 through 7) associated with the interrupt acknowledge
and request signals under test.
As each external clock is tested, the program displays:
Test for clock n
Variable
Description
n
Specifies the number (0 or 1) associated with the external clock signal under
test.
If the clock test is successful, the program appends ...PASSED! to the milestone
message. If the clock test fails, the program appends ...FAILED! to the milestone
message and displays an error message. If an error is detected and the Stop on
Error option is enabled, this milestone message is not displayed.
Debug Messages
Debug messages provide detailed test information during the execution of the
External Interrupt and Clock Cable Diagnostic. You enable or disable displaying
debug messages during program initialization. Refer to Chapter 2 for a description
of the initialization options.
Chapter 4
Program Messages
4-3