Initialization Procedure - Sun Microsystems StorEdge A7000 Manual

Initialization Procedure

Once you select Initialize Diag. from the Interactive Mode Options Menu, the
program displays a series of initialization prompts. The following responses are
standard for all initialization prompts:
TABLE 2-1
Response
cr
?
^
1. The diagnostic first displays the following help information prompt:
Do you need help? Enter Y or N (CR)
Enter Y to display a help message. Enter N or press the Return key to bypass
displaying help information. The default response is N.
2. The program then displays:
Do you wish to enable milestones? = No ;[cr,?,^,Y,N]?
Enter one of the following or a standard response:
Response
Y
N
3. The program displays:
Do you wish to enable debug messages? = No ;[cr,?,^,Y,N]?
2-2 Sun StorEdge A7000 External Interrupt and Clock Cable Diagnostic Reference Manual • October 1998
Standard Prompt Responses
Description
Press the return key to select the default response displayed in the prompt.
Display help information.
Return to the Interactive Mode Options Menu.
Description
Enables displaying all milestone messages.
Inhibits displaying milestone messages.