Setting Kilometers Or Miles - KTM 150 XC-W TPI 2022 Setup Instructions

Hide thumbs Also See for 150 XC-W TPI 2022:
Table of Contents

Advertisement

3 WORK
Note
Material damage Inadequate fuel quality causes the fuel filter to quickly become clogged.
In some countries and regions, the available fuel quality and cleanliness may not be sufficient. This will result in
problems with the fuel system.
Refuel only with clean fuel that meets the specified standards.
3.32
38
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
Avoid skin, eye and clothing contact with fuel.
Immediately consult a doctor if you swallow fuel.
Do not inhale fuel vapors.
In case of skin contact, rinse the affected area with plenty of water.
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
Change your clothing in case of fuel spills on them.
Note
Environmental hazard Improper handling of fuel is a danger to the environment.
Do not allow fuel to enter the groundwater, the soil, or the sewage system.
400382-10

Setting kilometers or miles

Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
400329-01
Open the fuel tank filler cap. (
Fill the fuel tank with fuel up to level
Guideline
A
Level
Total fuel tank
capacity, approx.
Info
Do not refuel using pre-mixed fuel.
Close the fuel tank filler cap. (
Condition
The motorcycle is stationary.
Repeatedly press the button
bottom right of the display.
Press the button
for 2–3 seconds.
The Setup menu is displayed and the active functions are
shown.
Repeatedly press the button
Adjusting the Km/h
Press the button
.
p. 36)
A
.
35 mm (1.38 in)
9.6 l
Super unleaded
(2.54 US gal)
(ROZ 95)
(
p. 44)
p. 37)
briefly until H appears at the
briefly until Km/h/Mph flashes.

Advertisement

Table of Contents
loading

This manual is also suitable for:

150 exc tpi 2022

Table of Contents