Adding 2-Stroke Oil - KTM 150 XC-W TPI 2022 Setup Instructions

Hide thumbs Also See for 150 XC-W TPI 2022:
Table of Contents

Advertisement

3 WORK
3.27
3.28
3.29
36
Closing 2-stroke oil tank cap
E00861-11

Adding 2-stroke oil

Warning
Engine failure The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
At the next opportunity add 2-stroke oil before you refuel.
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
M01516-10
Opening the fuel tank filler cap
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
Switch off the engine for refueling.
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
If any fuel is spilled, wipe it off immediately.
Observe the specifications for refueling.
Put the 2-stroke oil tank cap on and turn it clockwise.
1
Fold loop
down.
The 2-stroke oil tank cap engages.
Open 2-stroke oil tank cap. (
Fill the 2-stroke oil tank up to the lower edge
neck.
Guideline
Only use 2-stroke oil which is appropriate for separate lubri-
cation.
2-stroke oil tank con-
tent approx.
Close 2-stroke oil tank cap. (
p. 35)
A
of the filler
0.6 l (0.6 qt.)
Engine oil, 2-stroke
(
p. 44)
p. 36)

Advertisement

Table of Contents
loading

This manual is also suitable for:

150 exc tpi 2022

Table of Contents