Table of Contents
Advertisement
2 SETUP
4
Info
An assistant prevents the motorcycle from falling
over.
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
Info
The procedure in the event of transport damage is
described in the Customer Service Manual.
–
Remove the headlight mask with the headlight. (
402050-01
(150 EXC TPI EU)
–
Position the turn signal indicator lamp
bination instrument bracket.
H02474-10
Condition
Packaging V12
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling
over.
To avoid damaging the motorcycle during the setup,
leave the protective film on the vehicle until you
E00850-10
have finished.
–
Remove and unpack the separate enclosure and compo-
nents. Check that the scope of supply is complete using
the enclosed packing list.
Info
The procedure for missing components is described
in the Customer Service Manual.
–
Have a lift stand available.
Lift stand (78129955100)
–
Remove the two cable ties on the triple clamp.
p. 33)
1
in the com-
Advertisement
Table of Contents
