3 WORK
3.7
22
E00881-11
S03486-10
Checking the throttle cable routing
–
Mount and tighten screws
Guideline
Screw, fuel tank
spoiler on radiator
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Lubricate the O-ring and join quick release coupling
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray (
p. 45)
–
Join quick release coupling
–
Attach fuel tank breather hose
–
5
Plug in connector
for the fuel pump.
Finishing work
–
Mount the seat. (
p. 19)
Preparatory work
–
Remove the seat. (
p. 18)
–
Remove the fuel tank. (
2
with the collar bushings.
M6
6 Nm (4.4 lbf ft)
3
3
.
4
.
p. 19)
.