2 SETUP
12
–
Position the turn signal on both sides on the license plate
holder, mount nuts with washers and tighten.
–
Position the license plate lamp on the license plate holder,
and mount and tighten screws
–
Mount reflector
S03681-10
–
Drill a hole at marking
the size of the marking.
S03682-01
–
Position the tail light together with the license plate holder
on the license plate bracket.
Info
Ensure that the cables are routed correctly.
S03683-10
bq
.
br
on license plate holder.
A
on the license plate holder to