KTM 150 XC-W TPI 2022 Setup Instructions page 28

Hide thumbs Also See for 150 XC-W TPI 2022:
Table of Contents

Advertisement

3 WORK
26
Main work
Warning
Risk of injury 12 V batteries contain harmful sub-
stances.
Keep 12 V batteries out of the reach of children.
Keep sparks and open flames away from 12 V bat-
teries.
Only charge 12 V batteries in well-ventilated
S03489-10
rooms.
Maintain a minimum clearance from inflammable
materials when charging 12 V batteries.
Minimum clearance
Do not charge deeply discharged 12 V batteries if
the charge is already below the minimum voltage.
Minimum voltage before
the start of the charge
Dispose of 12 V batteries with less than the mini-
mum voltage correctly.
Disconnect negative cable
Pull back positive terminal cover
tive cable from the 12-V battery.
Pull EFI control unit
to the side.
S03490-10
Pull off starter relay
compartment and hang to the side.
S03491-10
1 m (3 ft)
9 V
1
from the 12-V battery.
2
and disconnect the posi-
3
4
upward off rubber lugs
5
6
and fuse box
from the battery
and hang

Advertisement

Table of Contents
loading

This manual is also suitable for:

150 exc tpi 2022

Table of Contents