KTM 150 XC-W TPI 2022 Setup Instructions page 18

2 SETUP
16
–
Mount the washer and splint
S03695-10
–
Position the frame protectors on both sides.
–
Hook in the frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame protec-
tor
–
Mount and tighten screws
Guideline
S03696-10
Screw, frame protec-
tor
–
Mount the cable ties.
–
Install the engine guard. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Make sure that the reflectors are glued on to the left and right
fork leg.
Info
The reflectors must not be covered by trim parts.
H02556-01
–
Stick displacement sticker on the left and right of the side
cover.
–
Attach the stickers included in the scope of supply (optional).
–
Set kilometers or miles. (
–
Adjust combination instrument function. (
–
Set the clock. (
–
Add 2-stroke oil. (
–
Refuel. ( p. 37)
V02170-10
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
cn
.
J
.
co
.
M5 3 Nm (2.2 lbf ft)
cp with washers.
M5 3 Nm (2.2 lbf ft)
p. 35)
p. 38)
p. 39)
p. 40)
p. 36)