Assembly - Fieldmann FZK 2115-E Manual

6.

ASSEMBLY

1. Connect the middle part of the handle to the bottom part of the handle and secure in place using the wing nut
(fig.3).
Fig. 3
2. Installing the top the handle top part:
– first seat the safety power cord holder (on the right side) on to the top part of the handle (fig. 1 point 10)
– Connect the top part of the handle to the middle part of the handle and secure in place using the wing nut
(fig.3)
– Using the supplied screws ST4 × 20, attach the switch box (fig.4) to the handle. The individual parts of the
switch box must slide into the holes in the handle. Then attach the power cords to the handle using the
plastic holders (fig.5).
Fig. 4
ELECTRIC TILLER
ST 4 × 20
Fig. 5
11 11 EN EN
Assembly
USER'S MANUAL