Assembly - Fieldmann FZK 2002 E User Manual

6.

ASSEMBLY

1. Insert the bottom part of the handle into the hole in the body of the tiller and secure it in place using the
provided screws M4 × 20 (fi g. 2).
Fig. 2
2. Connect the middle part of the handle to the bottom part of the handle and secure in place using the wing nut
(fi g. 3).
Fig. 3
3. Installing the top part of the handle:
– fi rst seat the safety power cord holder (on the right side) on to the top part of the handle (fi g. 1 point 10)
– Connect the top part of the handle to the middle part of the handle and secure in place using the wing nut
(fi g. 3)
– Using the supplied screws ST4 × 20, attach the switch box (fi g. 4) to the handle. The individual parts of
the switch box must slide into the holes in the handle. Then attach the power cords to the handle using the
plastic holders (fi g. 5).
Fig. 4
ELECTRIC TILLER
M4x20
4x
M6 × 45
ST 4 × 20
Fig. 5
Assembly 11 11 EN EN
USER'S MANUAL