Storage - Fieldmann FZK 2115-E Manual

To remove the blades from the shaft (fig. 1 2), screw out the hex bolt M8 x 40 from the shaft. Take the blades off the
shaft. To install the blades, proceed in reverse order.
Fig. 12
M8 × 40

11. STORAGE

ATTENTION: Risk of fire! The gearbox may be very hot both during and after use.
Store the tiller at a safe distance from fuels, oils, Vaseline and gasses.
Thoroughly clean the entire machine and its accessories.
Store it out of reach of children in a stable safe position in a cool dry location, avoid both excessively high and
excessively low temperatures. Protect it against the exposure to direct sunlight. If possible, store it in the dark. Do
not store in plastic bags to prevent the accumulation of moisture.
At the end of every season, perform a general inspection of the machine and remove any deposits that may have
accumulated. At the start of every season, make sure that you have checked the condition of the machine. If repairs
are necessary, please contact one of our service centres (address is on the warranty card).
Store the tiller in a clean dry location to which children do not have access.
For long term storage, ensure that the tiller is protected against corrosion and frost.
At the end of a season or if you will not be using the tiller for longer than a month, wipe all metal surfaces with a
cloth dipped in oil or spray it with a thin layer of oil to protect it from corrosion. Fold down the handle and store the
tiller in a suitable location.
ELECTRIC TILLER
Maintenance / Storage
M8 × 40
17 EN
USER'S MANUAL