Installing On A Swing Gate - Pilz PSEN sl-1.0p 4.2 Operating Manual

PSEN sl­1.0p 3.1/4.1/4.2
Installing on a swing gate
Align the actuator flush with the edge of the gate at the height
required and tighten the screws
Close gate.
Align the mounting bracket flush with the sensor and tighten
the screws.
Align the sensor and mounting bracket with the actuator and
tighten the screws.
Operating Manual PSEN sl­1.0p 3.1/4.1/4.2
1003389­EN­02
20