Disassembly
Removing and Replacing the Flip Assembly Cover
18
1.
Remove battery housing, battery, SIM, antenna, rear housing, and transceiver board
assembly as described in the procedures.
2.
Remove the main lens to have access to the screws.
3.
Use the T-5 driver to remove the 6 screws from the flip assembly (see Figure 8). Retain
the screws for re-assembly.
Screws
Figure 8. Removing the Flip Assembly Screws
4.
Before removing the flip cover, note the locations of the smart buttons on the sides of the
flip assembly.
October 26, 2006
Screws
Screws
6809505A64-O
031838o