Motorola V3 Service Manual page 31

Level 1 and 2 Service Manual
6809485A72-O
7. Lift the flip cover away from the flip assembly. Be careful not to damage the
display flex cable (see Figure 12).
Figure 12. Removing the Flip Assembly Cover
8. To replace, insert the smart buttons into the phone. Ensure the buttons contact
their respective switches on the display assembly.
9. Align the flip cover to the flip assembly, gently press the flip cover onto the flip
assembly until the flip cover latches engage.
10. Insert and tighten the 4 screws to secure the flip cover to the flip assembly.
Avoid damage to the flex cable.
11. Insert the 4 rubber screw covers over the flip assembly screws.
12. Replace the transceiver board assembly, rear housing, antenna assembly, SIM,
battery, and battery cover as described in the procedures.
July 30, 2004
Disassembly
040723o
31