Motorola V3 Service Manual page 34

Disassembly
34
5. Carefully lift the display lens away from the flip assembly.
Figure 15. Removing the Display Module Assembly
6. To replace, align the display module assembly to the flip assembly.
7. Carefully lower the display module into the flip assembly. Ensure that all of
the display none of the display assembly components are damaged.
8. align the flip display flex to the flex connector on the flip display assembly and
gently press down on the flex connector until properly seated.
9. Replace the camera assembly, flip assembly cover, transceiver board, rear
housing, antenna, SIM, battery, and battery connector as described in the
procedures.
July 30, 2004
Display Module
V3
6809485A72-O