Fieldmann FDUO 50501 Instruction Manual page 14

EN 14
Operation
Saw blade replacement
WARNING! Turn off the jig saw and unplug the power supply cable from the socket.
Select a saw blade as applicable for the material to be cut.
Lift the plastic transparent cover, turn the keyless chuck to the right, insert the blade
all the way (teeth facing you) and release the keyless chuck.
Insert the blade into the blade holder, ensuring that the teeth are pointing forward and the flat
back edge of the blade locates in the guide roller.
Close the protective plastic transparent cover.
Check the blade is correctly positioned in the guide roller and that is sure is secure in the
blade holder.
Dust exhaust
Insert the extraction nozzle into the dust extraction opening at the rear of the saw and twist
anticlockwise to secure. (Clockwise to remove.) Attach a standard vacuum cleaner hose and let
the vacuum collect the dust as you saw. Always use a face mask, even when using the vacuum
extraction system.
FDUO 50501