Table of Contents
Advertisement
Fax Settings > Default FAX settings
Item
Function Settings
Function Defaults
Fax
Address Book
One-Touch Key
Forward setting
Subaddress Box
Fax Memory RX Box
Status
Security Settings
Device Settings
Configures overall machine operation.
Display Settings
[Home] key > [...] > [System Menu] > [Device Settings] > [Display Settings]
Item
Show Power Off Message
Quick Setup Registration
(Fax)
Configures settings for copying, sending and Document Box
functions.
Defaults are the values automatically set after the warm-up
is completed or the [Reset] key is selected.
Set the defaults for available settings such as copying and
sending. Setting the frequently-used values as defaults
makes subsequent jobs easier.
Configures settings for fax functions.
Configures Address Book settings.
For details on Address Book, refer to the following:
Adding a Destination (Address Book) (page 2-14)
Configures One Touch Key settings.
For details on One Touch Key, refer to the following:
Adding a Destination on One Touch Key (page 2-20)
Configures settings for Forward setting.
For details on Forward setting, refer to the following:
Memory Forwarding (page 5-2)
Configures settings for Subaddress Box.
For details on Subaddress Box, refer to the following:
Subaddress Box Function (page 5-9)
Set whether to perform Print Immediately for the fax
documents received or to save them in the Fax Memory RX Box.
Configure settings for Status.
Configures security settings.
Set the mode whether display a confirmation message in power supply off.
Value: Off, On
Select the functions to be registered for Quick Setup.
Six keys of the Quick Setup screen are allocated to typical functions but can be
changed as necessary.
Six items in the following options are available.
Value: Off, Original Size, Duplex, Original Orientation, Density, Original Image,
Fax TX Resolution, Continuous Scan, Quiet Mode
Description
Description
8-4
Reference
Page
8-8
8-8
8-8
—
—
—
—
8-15
8-15
8-16
Advertisement
Table of Contents
Troubleshooting
