Assembly - ICON NordicTrack COMMERCIAL X32i User Manual

ASSEMBLY

1. To use the assembly steps in this manual, first see the helpful tips below.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not remove the protective
plastic sheet on the console until assembly is
completed. Do not dispose of the packing materi-
als until you fi nish all assembly steps.
• After shipping, there may be an oily substance on
the exterior of the incline trainer. This is normal.
If there is an oily substance on the incline trainer,
wipe it off with a soft cloth and a mild, non-abra-
sive cleaner.
2. Make sure that the power cord is unplugged.
Remove the four 3/8" x 3 1/4" Screws (18) from
the Base (74) (only one side is shown). Save the
Screws.
• To identify small parts, see page 7.
• Assembly requires the following tools:
the included hex keys
the included offset screwdriver
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
2
8
18
74