ICON NordicTrack COMMERCIAL X32i User Manual page 22

HOW TO CHANGE CONSOLE SETTINGS
IMPORTANT: Some of the settings and features
described may not be enabled. Occasionally, a
firmware update may cause your console to function
slightly differently.
1. Select the settings menu.
First, turn on the power and insert the key into the
console (see HOW TO TURN ON THE POWER on
page 15). Note: It may take a few moments for the
console to be ready for use.
Next, select the home screen. When you turn on
the console, the home screen will appear on the
screen after the console boots up. If you are in a
workout, tap the screen, touch the pause symbol,
touch the stop symbol, and then touch Finish to
return to the home screen.
Next, touch the menu button (three horizontal lines
symbol), and then touch Settings. The settings
menu will appear on the screen.
2. Navigate the settings menus and change
settings as desired.
Slide or flick the screen to scroll upward or down-
ward if necessary. To view a settings menu, simply
touch the menu name. To exit a menu, touch the
back button (arrow symbol). You may be able to
view and change settings in the following settings
menus:
Account
• My Profi le
• In Workout
• Manage Accounts
Equipment
• Equipment Info
• Equipment Settings
• Maintenance
• Wi-Fi
About
• Legal
3. Customize the time zone and other settings.
To customize the time zone or other settings, touch
Equipment Settings, and then touch the desired
settings.
4. View machine information.
Touch Equipment Info to view app or machine info,
or to change the unit of measurement.
The console can display speed and distance in
either standard or metric units of measurement.
5. Update the console firmware.
For the best results, regularly check for
firmware updates. Touch Maintenance, and then
touch Update to check for firmware updates using
your wireless network. The update will begin auto-
matically. IMPORTANT: To avoid damaging the
console, do not turn off or unplug the incline
trainer while the firmware is being updated.
The screen will show the progress of the update.
When the update is complete, the incline trainer
will turn off and then turn back on. If it does not,
use the power switch (see HOW TO TURN ON
THE POWER on page 15) to turn the incline trainer
off, wait for a few seconds, and then turn it back
on again. Note: It may take a few minutes for the
console to be ready for use.
Note: Occasionally, a firmware update may cause
the console to function slightly differently. These
updates are always designed to improve your
exercise experience.
22