ICON NordicTrack COMMERCIAL X32i User Manual page 23

6. Calibrate the incline system of the incline
trainer.
Touch Calibrate Incline, and then touch Begin to
calibrate the incline system. The incline trainer will
automatically rise to the maximum incline level and
then return to the starting position. This will cali-
brate the incline system. When the incline system
is calibrated, touch Finish. Note: Occasionally,
the incline calibration may run automatically
when you turn on the incline trainer.
IMPORTANT: Keep pets, feet, and other objects
away from the incline trainer while the incline
system is calibrating. In an emergency, pull
the key from the console to stop the incline
calibration.
7. Exit the settings menu.
If you are in a settings menu, touch the back arrow
to exit.
HOW TO CONNECT TO A WIRELESS NETWORK
The console is Wi-Fi enabled, allowing you to set up a
wireless network connection.
1. Select the home screen.
See step 2 on page 17.
2. Select the wireless network menu.
Touch the menu button (three horizontal lines
symbol), and then touch the Wi-Fi
the wireless network menu.
3. Enable Wi-Fi.
Make sure that Wi-Fi is enabled. If it is not, touch
the Wi-Fi toggle to enable a wireless connection.
4. Set up and manage a wireless network
connection.
When Wi-Fi is enabled, the screen will show a list
of available networks. Note: It may take several
seconds for the list of wireless networks to appear.
Note: You must have your own wireless network
and an 802.11b/g/n router with SSID broadcast
enabled (hidden networks are not supported).
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
23
® symbol to enter