ICON NordicTrack COMMERCIAL X32i User Manual page 24

An information box will ask if you want to connect
to the wireless network. Touch Join to connect to
the network or touch Cancel to return to the list of
networks. If the network has a password, touch the
password entry box. A keyboard will appear on the
screen. To view the password as you type it, touch
the Show Password checkbox.
To use the keyboard, see HOW TO USE THE
TOUCH SCREEN on page 15.
When the console is connected to your wireless
network, a checkmark will appear next to the wire-
less network name.
To disconnect from a wireless network, touch and
hold the name of the wireless network and then
touch Forget.
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
Note: The console supports unsecured and
secured (WEP, WPA™, and WPA2™) encryption.
A broadband connection is recommended; perfor-
mance depends on connection speed.
Note: If you have questions after following
these instructions, go to support.iFIT.com for
assistance.
5. Exit the wireless network menu.
To exit the wireless network menu, touch the back
arrow on the screen.
THE OPTIONAL HEART RATE MONITOR
Whether your
goal is to
burn fat or to
strengthen your
cardiovascular
system, the key
to achieving the
best results is
to maintain the
proper heart
rate during your
workouts. A wearable rate monitor will enable you to
continuously monitor your heart rate while you exer-
cise, helping you to reach your personal fitness goals.
To purchase a wearable heart rate monitor, please
see the front cover of this manual.
Note: The console is compatible with all Bluetooth
Smart heart rate monitors.
To connect a wearable heart rate monitor to the
console, first put it on as directed in its included
instructions. Then, when you begin a workout or start
the walking belt in the manual mode, the console
will search for the wearable heart rate monitor for 30
seconds and connect automatically.
24